While industry is asking for more power handling optics, IDIL answers perfectly by providing connectors which enlarge beam waist and reduce power density at the plug connection. By welding single mode fiber and the right length of graded index fiber, these connectors allow high power handling capacity and low insertion losses.
Moreover, their small size and the high contamination tolerance make them very useful in a large spectrum of applications. These connectors are available in FC, SC, ST, LC, E-2000, SMA and also PM.
|SMF GIF CONNECTOR|
|Insertion loss||0.3 dB typical|
|0.5 dB max|
|Return loss||-50 dB (0° polished)|
|-60 dB max|
|Wavelength range||400 nm - 2 µm|
|Wavelength bandwidth||200 nm typical|
|Optical power handling||3 W typical|
|10 W max|
|Beam diameter||50 - 300 µm|
|Connectors||FC, LC, SC, SMA, ST, E2000, PM, other|
|Operating temperature||From - 40°C to + 85°C|
These high power connectors use graded index fiber on one mating end (connector 1) to collimate and expand the light beam on the connector 2 which refocus the light back into the fiber core.
Beam waist is typically about 60 µm at the extremity of the graded index fiber. However, depending on your application, it can be easily increased by using bigger fibers and ferrules.