HR spectrometers are used where fast reactions need to be monitored and high resolution is necessary, such as characterizing lasers, measuring gas absorbance and determining atomic emission lines.
The HR is available in two different ways: custom configured and preconfigured.
for more informations
|Wavelength range||190 - 1100 nm|
|Slit (input)||10 µm, 5 µm|
|A/D resolution||16 bit|
|Optical resolution||H1 - H14; HC-1|
|Optical resolution||0.9 nm FWHM, 047 nm FWHM, 0.62 nm FWHM|
|Integration time||1 ms - 65 seconds|
|Dynamic range||2,000:1 (for a single acquisition)|
|Input fiber connector||SMA 905|
|SNR||250:1, 290 :1, 300 :1|
|Stray light||< 0.05% at 600 nm ; 0.10% at 435 nm|
|Wire||USB 2.0, 480 Mbps, I2C (2-wire)|
|Operating temperature||from -10°C to +50 °C|
|Size||148.6 x 104.8 x 45.1 mm|
The HR2000+ (Custom) spectrometer is a small-footprint, high-resolution spectrometer that is well suited for applications such as wavelength characterization of lasers and LEDs, monitoring of gases and monochromatic light sources, and determination of elemental atomic emission lines. Depending on spectrometer configuration, an optical resolution as fine as ~0.035 nm (FWHM) is possible.
The HR4000 (Custom) spectrometer is responsive from 200-1100 nm, but the specific range and resolution depend on your grating and entrance slit choices. This novel combination of optics and electronics is ideal for applications such as characterizing lasers, measuring gas absorbance, and determining atomic emission lines.