Flame-RAD is a preconfigured spectrometer for irradiance measurements
The spectrometer covers the UV-Vis wavelength range (200-850 nm) and include a cosine corrector to collect signal from 180° field of view.
Flame spectrometers are built using industry-leading manufacturing techniques that help deliver high thermal stability and low unit to unit variation. They offer more freedom and less frustration for users thanks to their interchangeable slits, simple device connectors and LED status indicators.
Contact us
for more informations
for more informations
- Agricultural Measurements and Monitoring
- Air & Water Quality Analysis
- Biofuels Analysis
- Biotechnology Applications
- Earth Sciences
- Engineering
- Food & Beverage Quality Control
- Health & Life Sciences
- Laser Characterization
- LED Measurement
- Light Measurement
- Medical Diagnostics
- Metallurgical Analysis
- Photovoltaic Analysis
- Physics & Astronomy
- Plasma Monitoring
- Polymer Analysis
- Protein & Nucleic Acid Analysis
- Remote Sensing
- Teaching Labs
- Thickness Measurement
- Volcanic Research
| Flame-RAD | |
|---|---|
| Wavelengths | UV-Vis (200 – 850 nm)* |
| Spectroscopy | |
| Integration time | 1 ms – 65 s |
| Corrected linearity | >99% |
| Dark noise | 50 RMS counts |
| Dynamic range | 1300:1 for a single acquisition, 8.5 x 10^7 (system) |
| Input fiber connector | SMA 905 |
| Signal to noise ratio | 250:1 (full signal) |
| Detector | |
| Detector type | Linear silicon CCD array |
| Entrance slit | 50 µm |
| Grating | Grating_#1 (UV-Vis) |
| Pixels | 2048 |
| Detector collection lens | Yes |
| Electronics | |
| A/D resolution | 16 bit |
| Connectors | USB, high density 40 pin JAE DD4 connector |
| Inputs/Outputs | 8 x user programmable GPIOs |
| Trigger modes | 4 modes |
| Power consumption | 250 mA @ 5 VDC |
| Physical | |
| Dimensions | 89.1 x 63.3 x 31.9 mm3 |
| Weight | 265 g |
*other ranges available on request
All products